togo Crushing Bucket
The CMX series crushing bucket is a jaw type crushing tool used at the front end of excavators, with low noise and minimal dust generation, meeting environmental requirements. By using hydraulic drive, the power is stronger. The bucket is made of wear-resistant steel plates as a whole, with high structural strength. The upper and lower jaw plates can be used interchangeably, and the single jaw plate can also be used interchangeably, greatly extending the service life of the product. The adjustable range of discharge port size is 10-150mm.
Category:
Product Description
Specifications
| Model | BC20 | BC30 | BC40 |
| Applicable Excavator (T) | ≥20 | ≥30 | ≥45 |
| Weight (T) | 3.15 | 4.75 | 7.59 |
| Bucket Capacity (m³) | 0.8 | 1.3 | 2 |
| Oil Pressure (Mpa) | 24 | 24 | 28 |
| Flow Rate (L/min) | 220 | 240 | 300 |
| Opening Width (mm) | 850 | 1190 | 1300 |
| Opening Height (mm) | 430 | 525 | 474 |
| Overall Dimensions (Length*Width*Height) | 2070*1310*1395 | 2150*1655*1385 | 2940*2080*1480 |
*This content and the technical specifications and parameters of the listed products are subject to change without prior notice!
A crushing bucket is an excavator attachment designed to crush stones, concrete, and construction waste on-site. It improves efficiency, reduces transport costs, and supports recycling in demolition and construction projects
: next page
At Xinfenghua, we go beyond supplying parts – we act as strategic partners, dedicated to helping you optimize equipment performance and reduce total cost of ownership.
