Sweden Cone Auger Drill Bucket
Category:
Product Description
Type chart:
| Cutting Dia. | Spiral HIT. | Spiral Pitch | Shell THK. | Spiral OD. | Center Tube OD. | Teeth No. | Weight |
| φ600 | 1000 | 400 | 30+20 | 550 | 219 | 12 | 523 |
| φ800 | 1500 | 600 | 30+20 | 750 | 219 | 15 | 720 |
| φ900 | 1500 | 600 | 30+20 | 850 | 219 | 20 | 774 |
| φ1000 | 1500 | 600 | 30+20 | 950 | 219 | 23 | 853 |
| φ1200 | 1500 | 600 | 30+30 | 1150 | 219 | 27 | 1023 |
| φ1500 | 1500 | 600 | 30+30 | 1450 | 273 | 33 | 1310 |
| φ1600 | 1500 | 600 | 30+30 | 1550 | 273 | 36 | 1650 |
| φ1800 | 1500 | 600 | 30+30 | 1750 | 273 | 40 | 2150 |
| φ2000 | 1500 | 600 | 40+40 | 1950 | 273 | 45 | 2580 |
| φ2200 | 1500 | 600 | 40+40 | 2150 | 273 | 52 | 3150 |
| φ2500 | 1500 | 600 | 40+40 | 2450 | 273 | 58 | 3850 |
Note: All units of measurement are in millimeters (mm); The weight unit is kilogram (kg).
Customizable projects:
Customized cutting diameter: Design cutting diameters according to customer needs, such as φ 950, φ 1050, etc., mostly used in conjunction with casing construction;
Spiral height customization: Design the spiral height according to customer needs, such as increasing it to 1500-2000 to increase the single drilling volume and improve construction efficiency; Customization of spiral blade spacing: Design spiral blade spacing according to customer needs, 400, 500, 600, adjust slag carrying and unloading capacity, etc;
Strengthening customization of key structures: according to customer needs, various parameters of different parts are strengthened, such as thickening of wall thickness, thickening of bottom plate, etc;
Square head size customization: Customize the drilling tool square head size according to the customer's drilling rod square head, usually 130 × 130, 150 × 150, 200 × 200, etc;
: next page
At Xinfenghua, we go beyond supplying parts – we act as strategic partners, dedicated to helping you optimize equipment performance and reduce total cost of ownership.
